A review of compression glove modifications to enhance functional grip: A case series

A common complaint among patients with burns is their inability to grasp items while wearing compression gloves. Recent technological innovations permit the addition of grip-enhancing material to garment fabric. The purpose of this case series was to describe the course of development of compression gloves with enhanced grip modifications. Five different types of grip modifications were made during a period of 18 months. Five subjects who were prescribed compression gloves tested each type of glove. The gloves were fabricated with grip-enhancing material on the palmar surface in five ways: 1) rectangular rubber tabs; 2) honeycomb pattern silicone; 3) wave-like pattern silicone; 4) line pattern silicone beads; 5) line pattern silicone beads embedded into the fabric. Each glove was evaluated on a three-point Likert scale (0 = poor, 1 = moderate, 2 = good) for grip-enhancing qualities and durability. All five subjects reported similar experiences with each glove type: 1) the rectangular rubber tabs demonstrated poor grip and moderate durability; 2) the honeycomb pattern provided good grip but poor durability; 3) the wave pattern had good grip and moderate durability; 4) the silicone beads adhered to the fabric had moderate grip but poor durability; 5) the silicone beads embedded into the fabric had moderate grip and good durability. The wave pattern provided the best gripping capability and silicone embedded into the fabric demonstrated the best durability. A wave-like pattern silicone material embedded into the fabric seems to provide the best combination of grip and durability to enhance activities of daily living performance.