Carbide-bonded graphene coated zirconia for achieving rapid thermal cycling under low input voltage and power

Min Wu, Lin Zhang, Eusebio Duarte Cabrera, Jun Jie Pan, Hao Yang, Dan Zhang, Zhao Gang Yang, Jian Feng Yu, Jose Castro, Han Xiong Huang, L. James Lee

Research output: Contribution to journalArticle

Abstract

Despite major advancement in coating graphene layers at material surfaces, challenges still exist towards achieving rapid heating and cooling under low energy consumption. Herein, atmospheric pressure chemical vapor deposition (APCVD) method was adopted to coat carbide-bonded graphene at the surface of zirconia substrate with a 2.7 cm diameter and a 1 cm thickness. The graphene coated zirconia substrate can achieve rapid thermal cycling with as high as approximately 50 °C/s of average heating rate at 150–320 °C temperature range using a low input voltage (12 V) and power (48 W). That is mainly due to the formation of highly qualified graphene and single-wall carbon nanotubes at the carburization layer, which is confirmed by the Raman spectra. The excellent electrothermal response characteristics is expectantly useful for rapid thermal cycling in injection molding thin-wall parts with high processing temperature (higher than 250 °C) under operation safety and low energy consumption, which is obviously absent in this emerging research area.

Original languageEnglish (US)
Pages (from-to)24318-24323
Number of pages6
JournalCeramics International
Volume45
Issue number18
DOIs
Publication statusPublished - Dec 15 2019
Externally publishedYes

    Fingerprint

Keywords

  • Chemical vapor deposition
  • Electrothermal response
  • Graphene
  • Rapid thermal cycling
  • Zirconia

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Process Chemistry and Technology
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this