Evaluation of gantry speed on image quality and imaging dose for 4D cone-beam CT acquisition

Andrew P. Santoso, Kwang H. Song, Yujiao Qin, Stephen J. Gardner, Chang Liu, Indrin J. Chetty, Benjamin Movsas, Munther Ajlouni, Ning Wen

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Background: This study investigates the effect of gantry speed on 4DCBCT image quality and dose for the Varian On-Board Imager®. Methods: A thoracic 4DCBCT protocol was designed using a 125 kVp spectrum. Image quality parameters were evaluated for 4DCBCT acquisition using Catphan® phantom with real-time position management™ system for gantry speeds varying between 1.0 to 6.0°/s. Superior-inferior motion of the phantom was executed using a sinusoidal waveform with five second period. Scans were retrospectively sorted into 4 phases (CBCT-4 ph) and 10 phases (CBCT-10 ph); average 4DCBCT (CBCT-ave), using all image data from the 4DCBCT acquisitions was also evaluated. The 4DCBCT images were evaluated using the following image quality metrics: spatial resolution, contrast-to-noise ratio (CNR), and uniformity index (UI). Additionally, Hounsfield unit (HU) sensitivity compared to a baseline CBCT and percent differences and RMS errors (RMSE) of excursion were also determined. Imaging dose was evaluated using an IBA CC13 ion chamber placed within CIRS Thorax phantom using the same sinusoidal motion and image acquisition settings as mentioned above. Results: Spatial resolution decreased linearly from 5.93 to 3.82 lp/cm as gantry speed increased from 1.0 to 6.0°/s. CNR decreased linearly from 4.80 to 1.82 with gantry speed increasing from 1.0 to 6.0°/s, respectively. No noteworthy variations in UI, HU sensitivity, or excursion metrics were observed with changes in gantry speed. Ion chamber dose rates measured ranged from 2.30 (lung) to 5.18 (bone) E-3 cGy/mAs. Conclusions: A quantitative analysis of the Varian OBI's 4DCBCT capabilities was explored. Changing gantry speed changes the number of projections used for reconstruction, affecting both image quality and imaging dose if x-ray tube current is held constant. From the results of this study, a gantry speed between 2 and 3°/s was optimal when considering image quality, dose, and reconstruction time. The future of 4DCBCT clinical utility relies on further investigation of image acquisition and reconstruction optimization.

Original languageEnglish (US)
Article number98
JournalRadiation Oncology
Volume11
Issue number1
DOIs
StatePublished - Jul 29 2016

Fingerprint

Cone-Beam Computed Tomography
Noise
Thorax
Ions
Time Management
Computer-Assisted Image Processing
Birds
X-Rays
Bone and Bones
Lung

Keywords

  • Cone-beam CT
  • Dosimetry
  • Image guidance
  • Motion management

ASJC Scopus subject areas

  • Oncology
  • Radiology Nuclear Medicine and imaging

Cite this

Santoso, A. P., Song, K. H., Qin, Y., Gardner, S. J., Liu, C., Chetty, I. J., ... Wen, N. (2016). Evaluation of gantry speed on image quality and imaging dose for 4D cone-beam CT acquisition. Radiation Oncology, 11(1), [98]. https://doi.org/10.1186/s13014-016-0677-8

Evaluation of gantry speed on image quality and imaging dose for 4D cone-beam CT acquisition. / Santoso, Andrew P.; Song, Kwang H.; Qin, Yujiao; Gardner, Stephen J.; Liu, Chang; Chetty, Indrin J.; Movsas, Benjamin; Ajlouni, Munther; Wen, Ning.

In: Radiation Oncology, Vol. 11, No. 1, 98, 29.07.2016.

Research output: Contribution to journalArticle

Santoso, AP, Song, KH, Qin, Y, Gardner, SJ, Liu, C, Chetty, IJ, Movsas, B, Ajlouni, M & Wen, N 2016, 'Evaluation of gantry speed on image quality and imaging dose for 4D cone-beam CT acquisition', Radiation Oncology, vol. 11, no. 1, 98. https://doi.org/10.1186/s13014-016-0677-8
Santoso, Andrew P. ; Song, Kwang H. ; Qin, Yujiao ; Gardner, Stephen J. ; Liu, Chang ; Chetty, Indrin J. ; Movsas, Benjamin ; Ajlouni, Munther ; Wen, Ning. / Evaluation of gantry speed on image quality and imaging dose for 4D cone-beam CT acquisition. In: Radiation Oncology. 2016 ; Vol. 11, No. 1.
@article{0a60b42a1a2e42348ddbcd72f1ce71b4,
title = "Evaluation of gantry speed on image quality and imaging dose for 4D cone-beam CT acquisition",
abstract = "Background: This study investigates the effect of gantry speed on 4DCBCT image quality and dose for the Varian On-Board Imager{\circledR}. Methods: A thoracic 4DCBCT protocol was designed using a 125 kVp spectrum. Image quality parameters were evaluated for 4DCBCT acquisition using Catphan{\circledR} phantom with real-time position management™ system for gantry speeds varying between 1.0 to 6.0°/s. Superior-inferior motion of the phantom was executed using a sinusoidal waveform with five second period. Scans were retrospectively sorted into 4 phases (CBCT-4 ph) and 10 phases (CBCT-10 ph); average 4DCBCT (CBCT-ave), using all image data from the 4DCBCT acquisitions was also evaluated. The 4DCBCT images were evaluated using the following image quality metrics: spatial resolution, contrast-to-noise ratio (CNR), and uniformity index (UI). Additionally, Hounsfield unit (HU) sensitivity compared to a baseline CBCT and percent differences and RMS errors (RMSE) of excursion were also determined. Imaging dose was evaluated using an IBA CC13 ion chamber placed within CIRS Thorax phantom using the same sinusoidal motion and image acquisition settings as mentioned above. Results: Spatial resolution decreased linearly from 5.93 to 3.82 lp/cm as gantry speed increased from 1.0 to 6.0°/s. CNR decreased linearly from 4.80 to 1.82 with gantry speed increasing from 1.0 to 6.0°/s, respectively. No noteworthy variations in UI, HU sensitivity, or excursion metrics were observed with changes in gantry speed. Ion chamber dose rates measured ranged from 2.30 (lung) to 5.18 (bone) E-3 cGy/mAs. Conclusions: A quantitative analysis of the Varian OBI's 4DCBCT capabilities was explored. Changing gantry speed changes the number of projections used for reconstruction, affecting both image quality and imaging dose if x-ray tube current is held constant. From the results of this study, a gantry speed between 2 and 3°/s was optimal when considering image quality, dose, and reconstruction time. The future of 4DCBCT clinical utility relies on further investigation of image acquisition and reconstruction optimization.",
keywords = "Cone-beam CT, Dosimetry, Image guidance, Motion management",
author = "Santoso, {Andrew P.} and Song, {Kwang H.} and Yujiao Qin and Gardner, {Stephen J.} and Chang Liu and Chetty, {Indrin J.} and Benjamin Movsas and Munther Ajlouni and Ning Wen",
year = "2016",
month = "7",
day = "29",
doi = "10.1186/s13014-016-0677-8",
language = "English (US)",
volume = "11",
journal = "Radiation Oncology",
issn = "1748-717X",
publisher = "BioMed Central",
number = "1",

}

TY - JOUR

T1 - Evaluation of gantry speed on image quality and imaging dose for 4D cone-beam CT acquisition

AU - Santoso, Andrew P.

AU - Song, Kwang H.

AU - Qin, Yujiao

AU - Gardner, Stephen J.

AU - Liu, Chang

AU - Chetty, Indrin J.

AU - Movsas, Benjamin

AU - Ajlouni, Munther

AU - Wen, Ning

PY - 2016/7/29

Y1 - 2016/7/29

N2 - Background: This study investigates the effect of gantry speed on 4DCBCT image quality and dose for the Varian On-Board Imager®. Methods: A thoracic 4DCBCT protocol was designed using a 125 kVp spectrum. Image quality parameters were evaluated for 4DCBCT acquisition using Catphan® phantom with real-time position management™ system for gantry speeds varying between 1.0 to 6.0°/s. Superior-inferior motion of the phantom was executed using a sinusoidal waveform with five second period. Scans were retrospectively sorted into 4 phases (CBCT-4 ph) and 10 phases (CBCT-10 ph); average 4DCBCT (CBCT-ave), using all image data from the 4DCBCT acquisitions was also evaluated. The 4DCBCT images were evaluated using the following image quality metrics: spatial resolution, contrast-to-noise ratio (CNR), and uniformity index (UI). Additionally, Hounsfield unit (HU) sensitivity compared to a baseline CBCT and percent differences and RMS errors (RMSE) of excursion were also determined. Imaging dose was evaluated using an IBA CC13 ion chamber placed within CIRS Thorax phantom using the same sinusoidal motion and image acquisition settings as mentioned above. Results: Spatial resolution decreased linearly from 5.93 to 3.82 lp/cm as gantry speed increased from 1.0 to 6.0°/s. CNR decreased linearly from 4.80 to 1.82 with gantry speed increasing from 1.0 to 6.0°/s, respectively. No noteworthy variations in UI, HU sensitivity, or excursion metrics were observed with changes in gantry speed. Ion chamber dose rates measured ranged from 2.30 (lung) to 5.18 (bone) E-3 cGy/mAs. Conclusions: A quantitative analysis of the Varian OBI's 4DCBCT capabilities was explored. Changing gantry speed changes the number of projections used for reconstruction, affecting both image quality and imaging dose if x-ray tube current is held constant. From the results of this study, a gantry speed between 2 and 3°/s was optimal when considering image quality, dose, and reconstruction time. The future of 4DCBCT clinical utility relies on further investigation of image acquisition and reconstruction optimization.

AB - Background: This study investigates the effect of gantry speed on 4DCBCT image quality and dose for the Varian On-Board Imager®. Methods: A thoracic 4DCBCT protocol was designed using a 125 kVp spectrum. Image quality parameters were evaluated for 4DCBCT acquisition using Catphan® phantom with real-time position management™ system for gantry speeds varying between 1.0 to 6.0°/s. Superior-inferior motion of the phantom was executed using a sinusoidal waveform with five second period. Scans were retrospectively sorted into 4 phases (CBCT-4 ph) and 10 phases (CBCT-10 ph); average 4DCBCT (CBCT-ave), using all image data from the 4DCBCT acquisitions was also evaluated. The 4DCBCT images were evaluated using the following image quality metrics: spatial resolution, contrast-to-noise ratio (CNR), and uniformity index (UI). Additionally, Hounsfield unit (HU) sensitivity compared to a baseline CBCT and percent differences and RMS errors (RMSE) of excursion were also determined. Imaging dose was evaluated using an IBA CC13 ion chamber placed within CIRS Thorax phantom using the same sinusoidal motion and image acquisition settings as mentioned above. Results: Spatial resolution decreased linearly from 5.93 to 3.82 lp/cm as gantry speed increased from 1.0 to 6.0°/s. CNR decreased linearly from 4.80 to 1.82 with gantry speed increasing from 1.0 to 6.0°/s, respectively. No noteworthy variations in UI, HU sensitivity, or excursion metrics were observed with changes in gantry speed. Ion chamber dose rates measured ranged from 2.30 (lung) to 5.18 (bone) E-3 cGy/mAs. Conclusions: A quantitative analysis of the Varian OBI's 4DCBCT capabilities was explored. Changing gantry speed changes the number of projections used for reconstruction, affecting both image quality and imaging dose if x-ray tube current is held constant. From the results of this study, a gantry speed between 2 and 3°/s was optimal when considering image quality, dose, and reconstruction time. The future of 4DCBCT clinical utility relies on further investigation of image acquisition and reconstruction optimization.

KW - Cone-beam CT

KW - Dosimetry

KW - Image guidance

KW - Motion management

UR - http://www.scopus.com/inward/record.url?scp=84979710981&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84979710981&partnerID=8YFLogxK

U2 - 10.1186/s13014-016-0677-8

DO - 10.1186/s13014-016-0677-8

M3 - Article

VL - 11

JO - Radiation Oncology

JF - Radiation Oncology

SN - 1748-717X

IS - 1

M1 - 98

ER -