Modeling of carbon fiber couch attenuation properties with a commercial treatment planning system

I. B. Mihaylov, P. Corry, Y. Yan, V. Ratanatharathorn, E. G. Moros

Research output: Contribution to journalArticle

45 Citations (Scopus)

Abstract

The purpose of this work is to evaluate the modeling of carbon fiber couch attenuation properties with a commercial treatment planning system (TPS, Pinnacle3, v8.0d). A carbon fiber couch (BrainLab) was incorporated into the TPS by automatic contouring of all transverse CT slices. The couch shape and dimensions were set according to the vendor specifications. The couch composition was realized by assigning appropriate densities to the delineated contours. The couch modeling by the TPS was validated by absolute dosimetric measurements. A phantom consisting of several solid water slabs was CT scanned, the CT data set was imported into the TPS, and the carbon fiber couch was auto-contoured. Open (unblocked) field plans for different gantry angles and field sizes were generated. The doses to a point at 3 cm depth, placed at the linac isocenter, were computed. The phantom was irradiated according to the dose calculation setup and doses were measured with an ion chamber. In addition, percent depth dose (PDD) curves were computed as well as measured with radiographic film. The calculated and measured doses, transmissions, and PDDs were cross-compared. Doses for several posterior fields (0°, 30°, 50°, 75°, 83°) were calculated for 6 and 18 MV photon beams. For model validation a nominal field size of 10×10 cm2 was chosen and 100 MU were delivered for each portal. The largest difference between computed and measured doses for those posterior fields was within 1.7%. A comparison between computed and measured transmissions for the aforementioned fields was performed and the results were found to agree within 1.1%. The differences between computed and measured doses for different field sizes, ranging from 5×5 cm2 to 25×25 cm2 in 5 cm increments, were within 2%. Measured and computed PDD curves with and without the couch agree from the surface up to 30 cm depth. The PDDs indicate a surface dose increase resulting from the carbon fiber couch field modification. The carbon fiber couch attenuation for individual posterior oblique fields (75°) can be in excess of 8% depending on the beam energy and field size. When the couch is contoured in Pinnacle3 its attenuation properties are modeled to within 1.7% with respect to measurements. These results demonstrate that appropriate contouring together with relevant density information for the contours is sufficient for adequate modeling of carbon fiber supporting devices by modern commercial treatment planning systems.

Original languageEnglish (US)
Pages (from-to)4982-4988
Number of pages7
JournalMedical Physics
Volume35
Issue number11
DOIs
StatePublished - 2008

Fingerprint

X-Ray Film
Photons
carbon fiber
Ions
Equipment and Supplies
Water
Datasets

Keywords

  • Absolute dosimetry
  • Attenuation
  • Carbon fiber
  • Modeling

ASJC Scopus subject areas

  • Biophysics
  • Radiology Nuclear Medicine and imaging

Cite this

Modeling of carbon fiber couch attenuation properties with a commercial treatment planning system. / Mihaylov, I. B.; Corry, P.; Yan, Y.; Ratanatharathorn, V.; Moros, E. G.

In: Medical Physics, Vol. 35, No. 11, 2008, p. 4982-4988.

Research output: Contribution to journalArticle

Mihaylov, I. B. ; Corry, P. ; Yan, Y. ; Ratanatharathorn, V. ; Moros, E. G. / Modeling of carbon fiber couch attenuation properties with a commercial treatment planning system. In: Medical Physics. 2008 ; Vol. 35, No. 11. pp. 4982-4988.
@article{f34a55a849e54c98b2dc46968614c11f,
title = "Modeling of carbon fiber couch attenuation properties with a commercial treatment planning system",
abstract = "The purpose of this work is to evaluate the modeling of carbon fiber couch attenuation properties with a commercial treatment planning system (TPS, Pinnacle3, v8.0d). A carbon fiber couch (BrainLab) was incorporated into the TPS by automatic contouring of all transverse CT slices. The couch shape and dimensions were set according to the vendor specifications. The couch composition was realized by assigning appropriate densities to the delineated contours. The couch modeling by the TPS was validated by absolute dosimetric measurements. A phantom consisting of several solid water slabs was CT scanned, the CT data set was imported into the TPS, and the carbon fiber couch was auto-contoured. Open (unblocked) field plans for different gantry angles and field sizes were generated. The doses to a point at 3 cm depth, placed at the linac isocenter, were computed. The phantom was irradiated according to the dose calculation setup and doses were measured with an ion chamber. In addition, percent depth dose (PDD) curves were computed as well as measured with radiographic film. The calculated and measured doses, transmissions, and PDDs were cross-compared. Doses for several posterior fields (0°, 30°, 50°, 75°, 83°) were calculated for 6 and 18 MV photon beams. For model validation a nominal field size of 10×10 cm2 was chosen and 100 MU were delivered for each portal. The largest difference between computed and measured doses for those posterior fields was within 1.7{\%}. A comparison between computed and measured transmissions for the aforementioned fields was performed and the results were found to agree within 1.1{\%}. The differences between computed and measured doses for different field sizes, ranging from 5×5 cm2 to 25×25 cm2 in 5 cm increments, were within 2{\%}. Measured and computed PDD curves with and without the couch agree from the surface up to 30 cm depth. The PDDs indicate a surface dose increase resulting from the carbon fiber couch field modification. The carbon fiber couch attenuation for individual posterior oblique fields (75°) can be in excess of 8{\%} depending on the beam energy and field size. When the couch is contoured in Pinnacle3 its attenuation properties are modeled to within 1.7{\%} with respect to measurements. These results demonstrate that appropriate contouring together with relevant density information for the contours is sufficient for adequate modeling of carbon fiber supporting devices by modern commercial treatment planning systems.",
keywords = "Absolute dosimetry, Attenuation, Carbon fiber, Modeling",
author = "Mihaylov, {I. B.} and P. Corry and Y. Yan and V. Ratanatharathorn and Moros, {E. G.}",
year = "2008",
doi = "10.1118/1.2982135",
language = "English (US)",
volume = "35",
pages = "4982--4988",
journal = "Medical Physics",
issn = "0094-2405",
publisher = "AAPM - American Association of Physicists in Medicine",
number = "11",

}

TY - JOUR

T1 - Modeling of carbon fiber couch attenuation properties with a commercial treatment planning system

AU - Mihaylov, I. B.

AU - Corry, P.

AU - Yan, Y.

AU - Ratanatharathorn, V.

AU - Moros, E. G.

PY - 2008

Y1 - 2008

N2 - The purpose of this work is to evaluate the modeling of carbon fiber couch attenuation properties with a commercial treatment planning system (TPS, Pinnacle3, v8.0d). A carbon fiber couch (BrainLab) was incorporated into the TPS by automatic contouring of all transverse CT slices. The couch shape and dimensions were set according to the vendor specifications. The couch composition was realized by assigning appropriate densities to the delineated contours. The couch modeling by the TPS was validated by absolute dosimetric measurements. A phantom consisting of several solid water slabs was CT scanned, the CT data set was imported into the TPS, and the carbon fiber couch was auto-contoured. Open (unblocked) field plans for different gantry angles and field sizes were generated. The doses to a point at 3 cm depth, placed at the linac isocenter, were computed. The phantom was irradiated according to the dose calculation setup and doses were measured with an ion chamber. In addition, percent depth dose (PDD) curves were computed as well as measured with radiographic film. The calculated and measured doses, transmissions, and PDDs were cross-compared. Doses for several posterior fields (0°, 30°, 50°, 75°, 83°) were calculated for 6 and 18 MV photon beams. For model validation a nominal field size of 10×10 cm2 was chosen and 100 MU were delivered for each portal. The largest difference between computed and measured doses for those posterior fields was within 1.7%. A comparison between computed and measured transmissions for the aforementioned fields was performed and the results were found to agree within 1.1%. The differences between computed and measured doses for different field sizes, ranging from 5×5 cm2 to 25×25 cm2 in 5 cm increments, were within 2%. Measured and computed PDD curves with and without the couch agree from the surface up to 30 cm depth. The PDDs indicate a surface dose increase resulting from the carbon fiber couch field modification. The carbon fiber couch attenuation for individual posterior oblique fields (75°) can be in excess of 8% depending on the beam energy and field size. When the couch is contoured in Pinnacle3 its attenuation properties are modeled to within 1.7% with respect to measurements. These results demonstrate that appropriate contouring together with relevant density information for the contours is sufficient for adequate modeling of carbon fiber supporting devices by modern commercial treatment planning systems.

AB - The purpose of this work is to evaluate the modeling of carbon fiber couch attenuation properties with a commercial treatment planning system (TPS, Pinnacle3, v8.0d). A carbon fiber couch (BrainLab) was incorporated into the TPS by automatic contouring of all transverse CT slices. The couch shape and dimensions were set according to the vendor specifications. The couch composition was realized by assigning appropriate densities to the delineated contours. The couch modeling by the TPS was validated by absolute dosimetric measurements. A phantom consisting of several solid water slabs was CT scanned, the CT data set was imported into the TPS, and the carbon fiber couch was auto-contoured. Open (unblocked) field plans for different gantry angles and field sizes were generated. The doses to a point at 3 cm depth, placed at the linac isocenter, were computed. The phantom was irradiated according to the dose calculation setup and doses were measured with an ion chamber. In addition, percent depth dose (PDD) curves were computed as well as measured with radiographic film. The calculated and measured doses, transmissions, and PDDs were cross-compared. Doses for several posterior fields (0°, 30°, 50°, 75°, 83°) were calculated for 6 and 18 MV photon beams. For model validation a nominal field size of 10×10 cm2 was chosen and 100 MU were delivered for each portal. The largest difference between computed and measured doses for those posterior fields was within 1.7%. A comparison between computed and measured transmissions for the aforementioned fields was performed and the results were found to agree within 1.1%. The differences between computed and measured doses for different field sizes, ranging from 5×5 cm2 to 25×25 cm2 in 5 cm increments, were within 2%. Measured and computed PDD curves with and without the couch agree from the surface up to 30 cm depth. The PDDs indicate a surface dose increase resulting from the carbon fiber couch field modification. The carbon fiber couch attenuation for individual posterior oblique fields (75°) can be in excess of 8% depending on the beam energy and field size. When the couch is contoured in Pinnacle3 its attenuation properties are modeled to within 1.7% with respect to measurements. These results demonstrate that appropriate contouring together with relevant density information for the contours is sufficient for adequate modeling of carbon fiber supporting devices by modern commercial treatment planning systems.

KW - Absolute dosimetry

KW - Attenuation

KW - Carbon fiber

KW - Modeling

UR - http://www.scopus.com/inward/record.url?scp=54949116628&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=54949116628&partnerID=8YFLogxK

U2 - 10.1118/1.2982135

DO - 10.1118/1.2982135

M3 - Article

C2 - 19070232

AN - SCOPUS:54949116628

VL - 35

SP - 4982

EP - 4988

JO - Medical Physics

JF - Medical Physics

SN - 0094-2405

IS - 11

ER -