MO‐D‐L100J‐05: A Semi‐Manual Contouring Method in TCS Views

Q. Chen, W. lu, M. Chen, K. Ruchala, G. Olivera

Research output: Contribution to journalArticle

Abstract

Purpose: Contouring plays an important role in radiation therapy. The traditional slice‐by‐slice manual contouring method is very time‐consuming. There have been several automatic and semi‐automatic segmentation methods proposed to make contouring easier. However, those methods are limited by the image quality and image features. In particular, all those methods fail in the prostate region where both prostate and rectum are difficult to segment. Methods:The contouring method we propose here only requires a few manual contours drawn in TCS (transversal, coronal, and sagittal) views. Our algorithm will then generate a 3D surface based on those manual contours. This method consists of two steps. The first step is a surface‐fitting process (the same principle as curve‐fitting). It determines a surface that approximates the manually drawn contour/control points. Different model is used for different organ (prostate, rectum) to create fit surface. The second step is a surface deformation process. A smooth deformation field is created automatically to deform the surface so that it passes through the manual contour points. This makes sure that the resulting surface conforms to the given contours. Results: This algorithm is very fast and user interactions can be easily incorporated. The algorithm was tested on 39 prostate and rectum cases and the results match manual contour results very well. Five manual contours are used. The false‐negative rate is around 0.07–0.08 and the speed‐up is around 3–5. Conclusions: We have presented a semi‐automatic method that only require human operator to draw a few manual contours to delineate a 3D structure. This method will produce a smooth contour and it is very robust.

Original languageEnglish (US)
Number of pages1
JournalMedical Physics
Volume34
Issue number6
DOIs
StatePublished - 2007

Fingerprint

Prostate
Rectum
Radiotherapy

ASJC Scopus subject areas

  • Biophysics
  • Radiology Nuclear Medicine and imaging

Cite this

MO‐D‐L100J‐05 : A Semi‐Manual Contouring Method in TCS Views. / Chen, Q.; lu, W.; Chen, M.; Ruchala, K.; Olivera, G.

In: Medical Physics, Vol. 34, No. 6, 2007.

Research output: Contribution to journalArticle

Chen, Q. ; lu, W. ; Chen, M. ; Ruchala, K. ; Olivera, G. / MO‐D‐L100J‐05 : A Semi‐Manual Contouring Method in TCS Views. In: Medical Physics. 2007 ; Vol. 34, No. 6.
@article{7dc0259c8dcc4019a1831cafc580f78f,
title = "MO‐D‐L100J‐05: A Semi‐Manual Contouring Method in TCS Views",
abstract = "Purpose: Contouring plays an important role in radiation therapy. The traditional slice‐by‐slice manual contouring method is very time‐consuming. There have been several automatic and semi‐automatic segmentation methods proposed to make contouring easier. However, those methods are limited by the image quality and image features. In particular, all those methods fail in the prostate region where both prostate and rectum are difficult to segment. Methods:The contouring method we propose here only requires a few manual contours drawn in TCS (transversal, coronal, and sagittal) views. Our algorithm will then generate a 3D surface based on those manual contours. This method consists of two steps. The first step is a surface‐fitting process (the same principle as curve‐fitting). It determines a surface that approximates the manually drawn contour/control points. Different model is used for different organ (prostate, rectum) to create fit surface. The second step is a surface deformation process. A smooth deformation field is created automatically to deform the surface so that it passes through the manual contour points. This makes sure that the resulting surface conforms to the given contours. Results: This algorithm is very fast and user interactions can be easily incorporated. The algorithm was tested on 39 prostate and rectum cases and the results match manual contour results very well. Five manual contours are used. The false‐negative rate is around 0.07–0.08 and the speed‐up is around 3–5. Conclusions: We have presented a semi‐automatic method that only require human operator to draw a few manual contours to delineate a 3D structure. This method will produce a smooth contour and it is very robust.",
author = "Q. Chen and W. lu and M. Chen and K. Ruchala and G. Olivera",
year = "2007",
doi = "10.1118/1.2761215",
language = "English (US)",
volume = "34",
journal = "Medical Physics",
issn = "0094-2405",
publisher = "AAPM - American Association of Physicists in Medicine",
number = "6",

}

TY - JOUR

T1 - MO‐D‐L100J‐05

T2 - A Semi‐Manual Contouring Method in TCS Views

AU - Chen, Q.

AU - lu, W.

AU - Chen, M.

AU - Ruchala, K.

AU - Olivera, G.

PY - 2007

Y1 - 2007

N2 - Purpose: Contouring plays an important role in radiation therapy. The traditional slice‐by‐slice manual contouring method is very time‐consuming. There have been several automatic and semi‐automatic segmentation methods proposed to make contouring easier. However, those methods are limited by the image quality and image features. In particular, all those methods fail in the prostate region where both prostate and rectum are difficult to segment. Methods:The contouring method we propose here only requires a few manual contours drawn in TCS (transversal, coronal, and sagittal) views. Our algorithm will then generate a 3D surface based on those manual contours. This method consists of two steps. The first step is a surface‐fitting process (the same principle as curve‐fitting). It determines a surface that approximates the manually drawn contour/control points. Different model is used for different organ (prostate, rectum) to create fit surface. The second step is a surface deformation process. A smooth deformation field is created automatically to deform the surface so that it passes through the manual contour points. This makes sure that the resulting surface conforms to the given contours. Results: This algorithm is very fast and user interactions can be easily incorporated. The algorithm was tested on 39 prostate and rectum cases and the results match manual contour results very well. Five manual contours are used. The false‐negative rate is around 0.07–0.08 and the speed‐up is around 3–5. Conclusions: We have presented a semi‐automatic method that only require human operator to draw a few manual contours to delineate a 3D structure. This method will produce a smooth contour and it is very robust.

AB - Purpose: Contouring plays an important role in radiation therapy. The traditional slice‐by‐slice manual contouring method is very time‐consuming. There have been several automatic and semi‐automatic segmentation methods proposed to make contouring easier. However, those methods are limited by the image quality and image features. In particular, all those methods fail in the prostate region where both prostate and rectum are difficult to segment. Methods:The contouring method we propose here only requires a few manual contours drawn in TCS (transversal, coronal, and sagittal) views. Our algorithm will then generate a 3D surface based on those manual contours. This method consists of two steps. The first step is a surface‐fitting process (the same principle as curve‐fitting). It determines a surface that approximates the manually drawn contour/control points. Different model is used for different organ (prostate, rectum) to create fit surface. The second step is a surface deformation process. A smooth deformation field is created automatically to deform the surface so that it passes through the manual contour points. This makes sure that the resulting surface conforms to the given contours. Results: This algorithm is very fast and user interactions can be easily incorporated. The algorithm was tested on 39 prostate and rectum cases and the results match manual contour results very well. Five manual contours are used. The false‐negative rate is around 0.07–0.08 and the speed‐up is around 3–5. Conclusions: We have presented a semi‐automatic method that only require human operator to draw a few manual contours to delineate a 3D structure. This method will produce a smooth contour and it is very robust.

UR - http://www.scopus.com/inward/record.url?scp=85024783791&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024783791&partnerID=8YFLogxK

U2 - 10.1118/1.2761215

DO - 10.1118/1.2761215

M3 - Article

AN - SCOPUS:85024783791

VL - 34

JO - Medical Physics

JF - Medical Physics

SN - 0094-2405

IS - 6

ER -