Taking a look at the calibration of a CCD detector with a fiber-optic taper

R. W. Alkire, F. J. Rotella, N. E C Duke, Zbyszek Otwinowski, Dominika Borek

Research output: Contribution to journalArticle

1 Scopus citations

Abstract

At the Structural Biology Center beamline 19BM, located at the Advanced Photon Source, the operational characteristics of the equipment are routinely checked to ensure they are in proper working order. After performing a partial flat-field calibration for the ADSC Quantum 210r CCD detector, it was confirmed that the detector operates within specifications. However, as a secondary check it was decided to scan a single reflection across one-half of a detector module to validate the accuracy of the calibration. The intensities from this single reflection varied by more than 30% from the module center to the corner of the module. Redistribution of light within bent fibers of the fiber-optic taper was identified to be a source of this variation. The degree to which the diffraction intensities are corrected to account for characteristics of the fiber-optic tapers depends primarily upon the experimental strategy of data collection, approximations made by the data processing software during scaling, and crystal symmetry.

Original languageEnglish (US)
Pages (from-to)415-425
Number of pages11
JournalJournal of Applied Crystallography
Volume49
DOIs
Publication statusPublished - 2016

    Fingerprint

Keywords

  • anomalous signal
  • CCD detectors
  • data scaling
  • fiber-optic tapers
  • flat-field calibration

ASJC Scopus subject areas

  • Biochemistry, Genetics and Molecular Biology(all)

Cite this