Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report

Joseph Zerr; Yonatan Chatzinoff; Rajiv Chopra; Kenneth Estrera; Avneesh Chhabra

doi:10.1007/s00256-016-2444-1

Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report

Joseph Zerr, Yonatan Chatzinoff, Rajiv Chopra, Kenneth Estrera, Avneesh Chhabra

Research output: Contribution to journal › Article › peer-review

27 Scopus citations

Abstract

Three dimensional (3D) printing can be used to create material models to aid preoperative planning of complex orthopedic procedures as exemplified by this case of total hip arthroplasty failure due to infection with resulting severe acetabular bone stock deficiency. The 3D model allowed for trialing of the acetabular component to determine cup size, position, and screw placement. Most importantly, the model confirmed that there was not a pelvic discontinuity and the revision shell would be sufficient for the reconstruction. Previously, the cost and complexity of utilization of 3D printers were prohibitive. Recent improvements in commercially available 3D printers have made rapid prototype model creation a realistic option, which can facilitate difficult surgery.

Original language	English (US)
Pages (from-to)	1431-1435
Number of pages	5
Journal	Skeletal radiology
Volume	45
Issue number	10
DOIs	https://doi.org/10.1007/s00256-016-2444-1
State	Published - Oct 1 2016

Keywords

3D model
3D printing
Hip replacement
Hip revision
Infection

ASJC Scopus subject areas

Radiology Nuclear Medicine and imaging

Access to Document

10.1007/s00256-016-2444-1

Cite this

@article{40e96f299fc14771ae9b81372897ce5a,

title = "Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report",

abstract = "Three dimensional (3D) printing can be used to create material models to aid preoperative planning of complex orthopedic procedures as exemplified by this case of total hip arthroplasty failure due to infection with resulting severe acetabular bone stock deficiency. The 3D model allowed for trialing of the acetabular component to determine cup size, position, and screw placement. Most importantly, the model confirmed that there was not a pelvic discontinuity and the revision shell would be sufficient for the reconstruction. Previously, the cost and complexity of utilization of 3D printers were prohibitive. Recent improvements in commercially available 3D printers have made rapid prototype model creation a realistic option, which can facilitate difficult surgery.",

keywords = "3D model, 3D printing, Hip replacement, Hip revision, Infection",

author = "Joseph Zerr and Yonatan Chatzinoff and Rajiv Chopra and Kenneth Estrera and Avneesh Chhabra",

note = "Publisher Copyright: {\textcopyright} 2016, ISS.",

year = "2016",

month = oct,

day = "1",

doi = "10.1007/s00256-016-2444-1",

language = "English (US)",

volume = "45",

pages = "1431--1435",

journal = "Skeletal radiology",

issn = "0364-2348",

publisher = "Springer Verlag",

number = "10",

}

TY - JOUR

T1 - Three-dimensional printing for preoperative planning of total hip arthroplasty revision

T2 - case report

AU - Zerr, Joseph

AU - Chatzinoff, Yonatan

AU - Chopra, Rajiv

AU - Estrera, Kenneth

AU - Chhabra, Avneesh

PY - 2016/10/1

Y1 - 2016/10/1

N2 - Three dimensional (3D) printing can be used to create material models to aid preoperative planning of complex orthopedic procedures as exemplified by this case of total hip arthroplasty failure due to infection with resulting severe acetabular bone stock deficiency. The 3D model allowed for trialing of the acetabular component to determine cup size, position, and screw placement. Most importantly, the model confirmed that there was not a pelvic discontinuity and the revision shell would be sufficient for the reconstruction. Previously, the cost and complexity of utilization of 3D printers were prohibitive. Recent improvements in commercially available 3D printers have made rapid prototype model creation a realistic option, which can facilitate difficult surgery.

AB - Three dimensional (3D) printing can be used to create material models to aid preoperative planning of complex orthopedic procedures as exemplified by this case of total hip arthroplasty failure due to infection with resulting severe acetabular bone stock deficiency. The 3D model allowed for trialing of the acetabular component to determine cup size, position, and screw placement. Most importantly, the model confirmed that there was not a pelvic discontinuity and the revision shell would be sufficient for the reconstruction. Previously, the cost and complexity of utilization of 3D printers were prohibitive. Recent improvements in commercially available 3D printers have made rapid prototype model creation a realistic option, which can facilitate difficult surgery.

KW - 3D model

KW - 3D printing

KW - Hip replacement

KW - Hip revision

KW - Infection

UR - http://www.scopus.com/inward/record.url?scp=84982815036&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84982815036&partnerID=8YFLogxK

U2 - 10.1007/s00256-016-2444-1

DO - 10.1007/s00256-016-2444-1

M3 - Article

C2 - 27480617

AN - SCOPUS:84982815036

SN - 0364-2348

VL - 45

SP - 1431

EP - 1435

JO - Skeletal radiology

JF - Skeletal radiology

IS - 10

ER -

Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this